Help with LG 27" monitor
-
Today my LG 27" monitor appeared as follows:
Look the photos in the next post.
Any idea?
-
The screenshots not reflect what I am seeing in the monitor, this are a photo:
-
@barbudo2005 Congratulations, you now have a 27" CRT monitor from 2001
Kidding aside, looks like some GPU driver setting gone bad, either trying to apply AA or Sharpening to the OS. Check your GPU control panel for global settings.
Or maybe some monitor setting you accidentally triggered? Have you read the manual?
Try launching Windows in Safe Mode and reinstall GPU driver completely.
You should remove the images from the first post as clearly they don't show the problem.
Also, come to think of it, if screenshots don't show the problem, it must be something in the monitor itself and probably not a GPU setting, not sure.
-
Said:
if screenshots don't show the problem, it must be something in the monitor itself and probably not a GPU setting, not sure.
That is the point, the screenshots are OK, so the problem is in the monitor itself.
-
@barbudo2005 I guess you'll have to do the general hardware troubleshooting:
- Test with another monitor
- Test with another GPU if you have (desktop PCs usually have integrated GPUs in motherboard)
- Test monitor on another machine
Also the obvious stuff like just unplugging/plugging the monitor, and make sure the cable is properly set in at both ends. And go through the monitor OSD settings checking every setting, and do a factory reset as well.
Try swapping different connector types if possible, like HDMI/DVI/DP or even VGA, depending on what the PC/monitor supports and what cables you have around.
If testing determines fault is definitely in monitor and it's is still under warranty go to the store and get a new one.
-
Sorry, I didn't say that I have another monitor where everything looks fine.
I will change the HDMI cable.